MCI SynAIRgPure™ 2.0 HVAC Probe 16K Non-Ozone

Top

MCI SynAIRgPure™ 2.0 HVAC Probe 16K Non-Ozone

Includes an Enhanced PCO cell + 1 Non-Ozone UV Lamp

The MCI SynAIRgPure™ 2.0 HVAC Probe 16K includes an Enhanced PCO cell + 1 UV Lamp. It can be customized to the load level of the environment and converted to a more powerful residential or commercial unit with the addition of a DBI Bracket and DBI cell(s).

16K SIZING CONSIDERATIONS:

  • 1-3 tons air handler
  • 400cfm-1200cfm airflow
  • 16,000 cubic feet living space (2,000 square feet, assuming 8' ceiling)
  • unit length: 9 inches

Ideal for any indoor environment where air quality is a concern! 

FEATURES & BENEFITS
New & Improved features!

  • PCO Cell/lamp twists 90 degrees
  • Robust, Vented Ballast - no more over-heating!
  • Two power indicator lights on the front (one for DBI cell, one for PCO cell)
  • Powered by connection to 24VAC (not thermostat circuit) from HVAC System or 24VDC from 100-240VAC transformer (included)

Proactive Technology Attacks Pollutants in the air and on surfaces, reducing VOCs, mVOCs, Odor, Bacteria, Viruses, Mold, and Particulates.

All MCI™ SynAIRgPure 2.0 units are effective against a wide range of contaminants in both the air and on surfaces.  Reduces odors, smoke, and a broad spectrum of indoor air and surface contaminants while cleaning the internal HVAC equipment and ductwork. The PCO cell + UV lamp is great for getting rid of odor and VOC's.

Cleans your environment - and the System

  • Helps keep duct systems free from contaminants (increasing oxidizers may be needed for harsh environments)
  • Reduces Bio-nesting
  • Eliminates/reduces mold, bacteria, and the odors associated with them
 INSTALLATION

Dual installation provides cleaning power to the internal equipment and the downstream duct system reducing microbials and other contaminants.  

SUPPLY: The unit should be installed after the air handler in the HVAC system in the supply plenum sized to match the HVAC equipment coverage area. 

RETURN:  An additional HVAC unit is recommended in the return plenum for added protection and to help keep the internal HVAC parts clean.  Eliminates the need for germicidal lamps shining on the evaporator coils. 

MAINTENANCE & WARRANTY

It is recommended for optimum performance that the UV lamp be replaced every year or when the light goes out, whichever occurs first. The quad-metallic target plate PCO cell is warranted for the life of the probe against manufacturer defects. The BALLAST carries a 3-year limited warranty that can be extended to 5 years with purchase of the Enhanced Warranty.  

Please refer to your OWNERS MANUAL for details.

Enhanced Warranty Available! Extends Manufacturer Warranty to three or five years!   When you choose to purchase the optional BLS Enhanced Warranty, you can be confident your unit will continue to provide reliable and trouble-free air purification for a full term of the applicable warranty following the purchase date.

VIEW WARRANTY OPTIONS

For Product Support/Repair:  Please file a support ticket or call 1.800.728.7206


EPA No. 87947-AR-1

NOTICE: This product Does not meet California air cleaner regulation (UL 2998) requirements: cannot be shipped to California.

REPLACEMENT PARTS are available in the CONSUMABLES category

[ BLSAPU-HP2-16NO3 ]

$ 899.94

Customize Your Selection

0.00
BLS Enhanced Warranty for HVAC Probes
Select BLS Enhanced Warranty for HVAC Probes
16K NO3 Probe RPL Parts Kit (to ship in 1 year)
Select 16K NO3 Probe RPL Parts Kit (to ship in 1 year)

Quantity